Instruction manual

FRONT PANEL

1. POWER ON SWITCH

The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and is receiving power

2. INPUT SOURCES DISPLAY

Input sources 1 to 8 LED illuminates green to indicate that a video source is present on that input.

3. SOURCE SELECT BUTTONS

A separate output 1 and 2 source select buttons are provided for each destination.

# Input 1 - Composite Video / Stereo Audio

# Input 2 - Composite Video / Stereo Audio

# Input 3 - S-Video / Stereo Audio

# Input 4 - S-Video / Stereo Audio

# Input 5 - Component Video (YPbPR) / Stereo Audio

# Input 6 - Component Video (YPbPR) / Stereo Audio

# Input 7 - VGA (RGBHV) / Stereo Audio

# Input 8 - VGA (RGBHV) / Stereo Audio

4. IR SENSOR

The IR sensor receives IR commands from the supplied remote controller.

5. SELECT VGA RESOLUTION BUTTONS

VGA output resolutions via selection buttons.

# 1 - VGA Resolution : 640 x 480

# 2 - SVGA Resolution : 800 x 600

# 3 - XGA Resolution : 1024 x 768

# 4 - SXGA Resolution : 1280 x 1024

# 5 - WXGA Resolution : 1366 x 768

# 6 - WSXGA Resolution : 1680 x 1050

# 7 - WUXGA Resolution : 1920 x 1200

6. OSD CONTROL

Adjust OSD on display via display screen.

7. LINE DISPLAY

Optional function for unit line to another unit.

8. ADJUST AUDIO OUTPUT VOLUME

Adjust output Audio Volume via LED display.