Instruction manual

ManualsBrandsMultiVideo ManualsComputer equipmentB - Chassis

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

electrical shock and injury to persons.

• To prevent ﬁ re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow

for sufﬁ cient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update or

to keep current the information contained in this document.

We reserve the right to make improvements to this document and/

or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer ﬁ le, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise — without express written permission and consent

Version 1.2 SEPT 2013

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.

CONTENTS

INTRODUCTION ...............................................................1

FEATURES & SPECIFICATIONS ....................................2

FRONT PANEL .................................................................3

REAR PANEL ..................................................................4

REMOTE CONTROL ........................................................5

IR EXTENDER .................................................................6

RS-232 SERIAL INTERFACE ..........................................7

RS-232 PROTOCOL COMMANDS ................................7

OSD FUNCTION SETUP ..................................................8

LIMITED WARRANTY ....................................................11

INTRODUCTION

The SB-3866 is a Multi-Video switcher featuring 8 inputs and 2

outputs (same signal on both outputs). The inputs are comprised

of: 2x Composite Video with Audio, 2x S-Video with Audio, 2x

Component video with Audio and 2x VGA with Audio. The outputs

are 2x VGA with/Audio (as same signal). Formats supported are

NTSC/PAL/SECAM video system. Supports High Deﬁ nition Digital

signal with data rates enabling 1080i formats or if in PC resolution

(1920x1200). It completely eliminates the need to constantly move

around HD input and output cables. Control is provided via Front

push buttons with LED readout or IR remote controller.

A RS-232 interface is provided for interfacing with third party con-

trol or use the provided software. Input cable equalizer enables

use of long cable runs of more then 50 feet (15 meters) when

using 24 AWG cable at 1080i. A windows-based control software

package is included to provide complete control of the SB-3866

from a PC.

PACKAGE CONTENTS

Check that you have the following components;

• SB-3866 8x2 Switcher

• IR Remote Control

• Rack Mounts

• RS-232 driver CD (All Windows Operating Systems)

• Users Guide

• AC/DC Adapter: 12VDC, 1000mA~3000mA

AC/DC Adaptor Types : CE/UL/SAA/BS