Datasheet

The soft start system utilised in the ÖKO 6 electronic starter first pre-heats the lamp
cathodes to working temperature, before applying a controlled voltage pulse to strike the
arc. This method of ignition prevents cathode damage and significantly lengthens lamp
life. Additionally, a safety monitoring system shuts down the system in the event of a fault
and prevents dangerous overheating and the annoying flashing associated with glow
type starters. R ircuit methods allow us to provide a 10 year no quibble guarantee
for this product which has a proven design life exceeding 20 years.
Housed in a two- pin canister with dimensions in accordance to IEC155, for the direct
replacement of glow starters without circuit modification.
efined c
Product Information ÖKO 6
Technical Data :
Operating voltage :
Preheat time :
Pulse height :
Safety shutdown :
Lamp types :
Operating temperature :
Storage temperature :
Approvals:
200 - 260 V AC 50/60 Hz
2.3 seconds nominal @ 20°C
1500 V maximum
Within 3.0 seconds @ 20°C
4-125W Linear T5/T8/T12
(not 100W 2.400 mm)
10-38W 2D (TC-DD)
11W PLS (TC)
10-26W PLC (TC-D)
18-36W PLL (TC-L)
20-60W Circular- and U-Tube (T-R, T-U)
- 20 to + 75°C
- 50 to + 105°C
-find more details and actual lamp list
under www.palmstep.com
Electronic starter for 4-125W single fluorescent lamp circuits.
Dimensions & materials :
All dimensions in millimetres
39
12.721
Inductiv circuit
St
C
L
N
Capacitiv circuit
St
C
L
N
C
LL
We reserve the right to alter details and specifications without prior notice. Ó PALM STEP ELECTRONICS Ltd 1999.
Canister: Polycarbonate, translucent green
Printing: Gold
Base: Polycarbonate
Pins: Nickel plated brass
10
VDE
Version 28.06.2000