User Manual

i-Page USER AND INSTALLATION GUIDE
Index of contents
Important User Information
Section Description Page
1.0 Checking supplied equipment 2
2.0 Tools 2
3.0 Equipment required 2
4.0 Assembly requirements 3
4.1 Assembly 3
4.2 Mounting 3
4.3 Power supply 3
4.4 Network cable 4
4.5 Aerial fitting 4
5.0 i-Page setup 4
5.1 i-Page network setup – Changing IP address for use on local network 5
5.2 IP Settings - Set static IP address, Netmask, gateway, Syslog for i-Page 5
5.3 Language - Select browser and pager languages 6
5.4 Clock - Set time and date 6
5.5 Paging setup - Set system address, paging format, time on/off, message 7
length and coverage test
5.6 Password - Set one administrator or five user passwords 7
5.7 Users - Add, amend or delete users 7
5.8 Groups - Add and remove groups 8
5.9 Stored Messages - Add or remove stored messages up to 80 characters 8
5.10 DLC’s - Programme DLC alarm details 9
5.11 Serial port - Select serial port protocol 9
5.12 Backup/Restore - Backup and restore i-Page data 10
5.13 Factory reset - Reset i-Page to factory setting. Note that all system data is 10
destroyed
6.0 Engineering button – Temporarily restore default IP address 10
7.0 Paging users and groups - User interface for paging users and groups 11
7.1 Logout - Used to log out of Multitone i-Page 11
8.0 Syslog message tracking – Optional software form logging messages 11
9.0 Transmitter alignment – Changing the transmitter frequency 11
10.0 Software upgrades – Updating i-Page 12
Appendices
Appendix 1 DLC alarm and serial port technical requirements 14
Appendix 2 Frequently asked questions and fault finding 15
Appendix 3 i-Page specifications 16
Appendix 4 Multitone Pagers 17
Appendix 5 i-Page Spares 18