User Manual

12 i-Page Installation & User Guide 9261-8879 Iss 2
10.0 Software upgrades
Upgrading software can only be carried out by your supplier or maintainer.
Programming software may be obtained from the support section of the Multitone website:-
http://www.Multitonei-Page.com.
Download the zip file and save to the computer from which programming will take place.
Run the program:-
"C:\Program Files\Texas Instruments\Stellaris\LM Flash Programmer\" and configure the
following options:-
 Quick set - Manual configuration
 Interface - Serial UART
 Check - Disable baud rate
 COM port - The COM port to be used for programming
 Baud rate - 115200
 Transfer size - 60
Select the PROGRAM menu and check the box for “Reset MCU” after program.
This ensures that i-Page will restart after the programme has been loaded.
Do not change any other menu options!
Backup i-Page data before re-programming.