User Manual

11 i-Page Installation & User Guide 9261-8879 Iss 2
Activating the button again will return the unit to its original IP address.
When activating the button, ensure that it is depressed squarely, and released fully.
7.0 Paging users and groups
The PAGING interface allows you to:-
 Send free format messages to a pager
 Send free format messages to a group
 Send preset messages to a user or group
 Select a beep code for the message
Select PAGING from the menu.
 Select one of the optional 8 beep codes
 Select a user or group
 Input your message or select a PRESET message
 SEND the message
If no message is entered or selected, you will see a message “Error: No message entered –
call not sent.”
7.1 Logout
When administration or messaging has been completed select LOGOUT.
In the event that an administrator or user has not logged out, any other user logging in will
override the person already logged in.
This ensures that access to the paging systems is always available.
8.0 SYSLOG message tracking
If you require confirmation that the message has been sent, then you can use any one of the
freeware Syslog software packages available on the internet.
The software must be installed on a computer, preferably one that has a static IP address.
Programme the IP address of the Syslog server in the IP SETTINGS menu.
9.0 Transmitter alignment
The i-Page transmitter is factory set, according to the frequency requested when ordered. It
may be necessary to re-align the transmitter in the event of any problems or to change the
frequency.
This work must not be carried out by the user.
Please contact your supplier or maintainer, for advice or support.
Refer to Multitone document 9261-8252.