User Manual

5 i-Page Installation & User Guide 9261-8879 Iss 2

5.1 i-Page network setup

 Changing computer IP address

o (Example using Microsoft XP)

 START - MY NETWORK PLACES – VIEW

NETWORK CONNECTIONS – LOCAL AREA

CONNECTION

 Select PROPERTIES

 Select “Use the following IP address”.

Enter, 192.168.1.11 and Netmask 255.255.0.0

 Select “OK” and “OK” and the new IP address will be saved

 Open your default browser and type;

o http://192.168.1.11/ into the top bar

o You will see the main screen of Multitone i-Page

displayed and can commence programming

 There is no default password

 Login to i-Page and the menu option below will be displayed

The menu items presented on the left hand side of the screen are used to programme i-

Page and to send messages to users and groups.

Logout - Used to log out of Multitone i-Page

Paging - User and administration interface for programming and paging

Users - Add, amend or delete users

DlC - Programme DLC alarm details

Groups - Add and remove groups

Messages - Add or remove stored messages up to 80 characters

Clock - Set time and date

Password - Set one administrator or five user passwords

Paging setup - Set system address, paging format, time on/off, message length and

coverage test

Language - Select browser and pager languages

IP settings - Set static IP address, Netmask, gateway and Syslog for i-Page

Serial port - Select serial port protocol

Backup/restore- Backup and restore i-Page data

Factory reset - Reset i-Page to factory setting. Note that all previous system data will be

erased!

5.2 Browser IP settings

The majority of businesses have a network managed by an IT or MIS manager and they will

be able to assist with the following instructions and will also need to provide an IP address

for i-Page, unless the default IP address is used.

These settings allow any user or administrator to use i-Page from their internet browser

software (Internet Explorer, Google, Firefox etc.).