System Manual

EkoTek System Installation and Configuration Manual
9261-8173 issue: 8 Page 68
© 2012 Multitone Electronics Plc
3. The third rule routes all escalated alarms raised by devices with user group
2, in zones 1,2 or 3, to pager group ‘Staff’ (the light grey highlight denotes
that only EkoTek pagers will be contacted in the group).
All other alarms will be routed by (default) to pager group 1.
Factory reset
Click the ‘Factory reset’ button to return the network to factory settings (all
devices deleted, IP addresses, passwords reset, etc).
Delete all devices
Click the ‘Clear database’ button to clear the database of all network devices,
but leave passwords, IP addresses, etc. as before.
Passwords
Change the system passwords.
‘User’ followed by a drop-down menu containing:
User
The User level allows access to all pages within the main and maintenance
menus and to the passwords page under the configuration menu (it can only
change the password for user).
Admin
The admin level allows access to all functions.
New password
Enter new password in the text input box. Click ‘Submit’ to enter the new
password.
‘User/admin password changed’ or ‘Password change failed’ will be displayed,
according to the outcome.