System Manual

EkoTek System Installation and Configuration Manual
9261-8173 issue: 8 Page 64
© 2012 Multitone Electronics Plc
Pager groups
These pages are used to manage hubs and display pagers into groups.
Devices may appear in none, one or many pager groups. Each group is
restricted to 35 devices.
Pager group selection page
The list of 32 pager groups is given in a drop-down menu. By default these are
named 1-32. Each group can be assigned a name if required, using the pager
group entry page.
Click ‘Details’ to open the pager group entry page and set up a group.
Pager group entry page
Pager group
Enter text for the pager group name.
All the connected display equipped devices are listed (by name) and a
checkbox denoting membership to this group. Check the box to add the
devices to the group.
External pager
If connection is to be made to an external pager, enter the pager identifier into
the number field. This is the identifier sent via the ESPA/TAP output interface.
Check the box to add the external pager to the group.
Click ‘Submit’ to confirm the new pager group membership. If more than 35
devices are selected the changes will not be accepted
.
Alert rules
The alert rules determine the target pager group for every alarm.