System Manual

EkoTek System Installation and Configuration Manual

9261-8173 issue: 8 Page 47

Tree View

The network tree is used to try to provide information relevant to the fixed

devices in the system. Information provided includes:

 Number of times a device requests it’s Config from hub

o A high number may indicate the need for additional repeaters – to overcome

poor radio connections

 The RRSI level (as indicated above)

A high number shows a good link but a low number does not necessarily mean

a poor link (it is for the last status report only and conditions /parent selections

change)

 The linkage paths between devices

This chain length to a given repeater is the number of ‘I’ symbols in front of it

 Identifies parent and child relationship

The parent can be identified from the child by identifying the (+) and tracking

upwards to the (<n>). The number of (I) indicates the number of hops from the

hub. This can lead to an unstable network with poor connections.

11. Configuration menus

System settings - hub

This page sets the network interfaces. It enables configuration of hub settings,

clock, external connections and the browser language.

Click ‘Configuration’ and select ‘System’.

Parent

–

030-0005137

Child

–

030-0005103

<n> = Number of requests for Config [n] =

RSSI Level