System Manual

EkoTek System Installation and Configuration Manual

9261-8173 issue: 8 Page 32

Set the ‘Number of rings to answer call’ box to 1.

Click the ‘Save to modem’ button, which stores the current values from the

configuration manager's fields to the writable memory of the modem.

Go to the DTE interface tab and set the DTR to ignore DTR.

Using Windows Hyper Terminal to set the interface speed

A terminal program is an application that will enable a PC to communicate

directly with a modem. If you are using Windows 2000 or Windows XP, you

can use the Windows HyperTerminal program as it is included as part of the

operating system.

1. Check that the modem is connected to a serial port on the PC.

2. Load HyperTerminal:

 Click Start > Run