System Manual

EkoTek System Installation and Configuration Manual

9261-8173 issue: 8 Page 20

Network monitoring mode

Channel activity

This shows the activity on each channel and is useful in determining the

amount of Wi-Fi activity on the system. Note: Channel activity can take some

time to be detected, so run for at least 1 minute.

Repeater information

This screen shows information about the repeater that the survey pager is

connected to. The bar display shows the strength of the repeater’s beacon

received by the survey pager relative to the programmed repeater location

range. The RSSI number is an indication of the signal strength of the

repeater’s parent as received at the repeater.

Out of range location beacon

This screen displays information about nearby repeaters. The bar display

shows the strength relative to the programmed repeater location range.