Quick Guide

9261-9209 EkoTek-Fob/QUG/Iss. 5 7 of 8
Status Indicators
Checking if the fob is on the network:
• To check if the device is on the network, press grey button (short press).
(LED : one flash = off network, two flashes = on network).
Low battery status alarm
• This alarm occurs when the battery reaches less than 25% charge.
• The notification is an audible and vibrate alert.
• The unit will continue to operate, but should be placed on charge at the earliest
opportunity.
Out of network range alarm
• This alarm occurs when the fob is out of range of the EkoTek mesh network.
• The notification is configured by the administrator to:
• Audible and vibrate alert
• Audible alert
• Vibrate alert