Manualshelf

User's Guide

ManualsBrandsMultitone Electronics ManualsElectronics2.4GHz Cordless Communication System Base Station
51525354555657585960
Page 51
Repeaters
Repeater number This is the number to assign to the repeater. The
assigned number of the repeater must be between
02 and 07
Example:
CS100 Base Station 0000(46423641)
Base to synchronise on 01
Repeater Number 02
When the Base station number, Synchronisation numbers and Repeater
number are entered “Write to repeater”.
The entry box background will change from yellow to white
To check the data has been written to the repeater.
Select “New” to clear data
Select “Read from Repeater”to check that it has been written correctly
Disconnect the programming cable from the repeater and wait at least 20
seconds before plugging in the power lead.
Check the repeater is on line
Red LED is flashing.
*99981* OK - Base Stations are shown - RPN - 01, 02
Press and hold < to clear the screen.