User's Guide

Page 50
Repeaters
5.6 Registering a Repeater
Select the Repeater tab to the left of Communications, and click the
‘Residential Base’ button to switch to CS100 mode. The following screen
will be displayed:
Read from Repeater Reads the current configuration settings directly
from the Repeater
Write to Repeater Writes the configuration settings you have entered
to the repeater. Your settings will automatically be
checked to make sure they are valid
New Clears all configuration settings in the software
CCFP repeater base Switches mode between Residential and CCFP
Repeater mode - Select Residential (CS100)
Residential base The residential base number (from the label on the
(DECT-z 500) rear side of the Base, for example 000046400266).
(CS100) The initial 4 zero’s are not required in the number,
so you can simply enter 46400266
Base to synchronise The number of the residential base, which the
on repeater must synchronise on. The number must be
between 01 and 07