User's Guide

Page 23
Master Handset
3.2 Registering the Master Handset
Before you begin, make a note of the CS100 identification number, located on the
back of the unit (ARI number). During the registration process, the 1st handset you
turn on automatically becomes the Master handset, and is configured to channel 00.
Follow these steps to complete the registration process: Check the software version
(PCS 4I, PCS 4K etc.) before you begin
*
99982
*
OK
1. Turn the handset ON.
2. Press the Menu key.
3. Press the Left Arrow key twice.
4. The menu will now display ‘Login’. Press the OK key, and the display
will change to ‘Select Login’ (Handsets up to PCS 4I).Handsets with PCS 4K
or later go to step 5 subscription create.
5. Press the Right Arrow key once, followed by OK(For handsets not previously
registered.) Subscription create.
6. The display should now read ‘Subscription Search ID’ and it will begin to
search for the CS100 ID number. When the handset finds a system, the ID
number will appear in the display. If the handset detects more than one
system, a black triangle will appear at the bottom of the display. Highlight
your serial number by using the Left and Right Arrow keys on the Master
handset.
ENSURE THAT THE NUMBER YOU SELECT EXACTLY MATCHES THAT
ON YOUR CS100 SYSTEM UNIT, INDICATED AS AN ARI NUMBER!