User's Guide

Page 16
Equipment Installation
* Charging your handset battery packs
When supplied, your handset battery pack will contain only a low residual
charge. To ensure reliable operation, ensure you fully charge the battery
packs. For the initial charge, allow up to 14 hours to ensure the battery is fully
charged. This process will take approximately 3½ hours (from fully discharged
to fully charged) during normal operation.
THIS PRODUCT CONTAINS NI MH BATTERIES. THESE BATTERIES MUST
BE RECYCLED, OR DISPOSED OF PROPERLY. DO NOT DISPOSE OF IN
FIRE, OR MUNICIPAL WASTE. CHECK WITH LOCAL CODES FOR
SPECIAL DISPOSAL INSTRUCTIONS.
Use only specified batteries in the handset, as other battery types eg Alkaline
or Lithium, may lead to hazardous conditions. Do not use non-specified
charging devices, as this could damage the batteries. Periodically clean the
charge contacts on both the handset and charger.
Exercise care when handling batteries, to avoid shorting contacts with conduc-
tive materials such as jewelry, or keys. Do not open or mutilate the batteries,
as the electrolyte is corrosive and toxic.
Batteries may heat-up slightly during charging. This is normal and not
dangerous.
(See also handset user guide).