Installation Instructions
Table Of Contents
- Approvals
- System Overview
- Network Design and Survey
- Installation
- Pre-requisites
- Installing the Hub
- Repeaters
- PPP Modem
- The Browser Interface
- Accessing the HUB with the browser interface
- Connect the Hub to the PC using Windows XP
- Using the Web Browser to Access the EkoTek Hub
- Main menus
- Maintenance Menus
- Configuration menus
- Final Checks
- Appendices
- Related Documentation and Revision History
EkoTek System Installation and Configuration Manual Overview
Sizeable networks can be easily built, due to the large number of Repeaters supported by
EkoTek.
Repeaters are normally installed on walls and/or ceilings. The Hub is installed either on a
wall or on a desk, so that the display can be easily seen.
Hub
Repeater
Hub and Repeaters automatically
form a mesh network
Figure 4. Typical Network Layout
Location Reporting
When a user raises an alarm signal, it is important to know the location of the user to
ensure that assistance arrives as quickly as possible.
EkoTek provides accurate location reporting, based on location signals sent out by the
Repeaters.
Repeater
Call Fob
Location
Signal
Figure 5. Location Reporting
9261-8173 Issue 2
Page 4
© 2007 Multitone Electronics PLC