Installation Instructions
Table Of Contents
- Approvals
- System Overview
- Network Design and Survey
- Installation
- Pre-requisites
- Installing the Hub
- Repeaters
- PPP Modem
- The Browser Interface
- Accessing the HUB with the browser interface
- Connect the Hub to the PC using Windows XP
- Using the Web Browser to Access the EkoTek Hub
- Main menus
- Maintenance Menus
- Configuration menus
- Final Checks
- Appendices
- Related Documentation and Revision History
EkoTek System Installation and Configuration Manual Browser Interface
Upload saved archive
1. Click the ‘browse’ button and locate the saved archive.
2. Click the ‘upload’ button and the configuration from the selected file is transferred to
the Hub. This may take a few minutes. If there is a failure to upload a saved
configuration, this will result in the display of the following message: ‘Error
encountered uploading request ed file’.
3 . If a valid configuration has been uploaded to the Hub, the following lines are
displayed: ‘Use archive sett ings (Will cause a hub reset and erase current
set t ings) ’.
4. Click the reset button to reset the Hub to the archived settings.
9261-8173 Issue 2
Page 47
© 2007 Multitone Electronics PLC