Installation Instructions

Table Of Contents
EkoTek System Installation and Configuration Manual Browser Interface
If any rules have been entered a table is displayed, the top row of which contains: -
User group: Param et ers set in the device entry. Groups 1 t o 16.
Zon e: Param eters set in t he device entry. Zones 1 t o 16.
Tim e : The day/night setting of the system. D =Day, N= Night.
Esc: The escalation level of the alarm. R = Raised, N=Normal.
A black square means that a particular group/zone/time of day/escalation has been
included in the rule). The end of the row is a button containing the name of the Pager
group that is targeted by the rule. If there are more than 16 rules in the table, the header
will be repeated after the last rule.
Edit mapping.
Clicking the Pager group name button at the end of the row causes the page to be re-
loaded with modifiable rules; the selected rule will appear as a shaded row and in place of
the Pager group name a remove button appears. The checkboxes are pre-loaded with the
current rules settings. Change the rule settings as required and then click submit to save
the amendments.
Remove
Clicking the ‘Remove’ button will remove that rule from the table.
Add
Click the ‘Add’ button to enter a brand new rule: note that this will only appear if there are
currently fewer than 32 rules.
Clicking the Add button will present a screen very similar to the edit rule mode; the initial
line is Ent er new rules de t a ils followed by the options and (clear) checkboxes as for
9261-8173 Issue 2
Page 44
© 2007 Multitone Electronics PLC