Installation Instructions

EkoTek System Installation and Configuration Manual Browser Interface
Pager group selection page
The list of 32 Pager groups is given in a drop-down menu (by default 1 - 32). Each group
can be assigned a name if required, using the Pager Group entry page.
Click ‘Details’ to open the Pager Group entry page and set up a group.
Pager group entry page
Pager group
Enter text for the Pager Group name.
All the connected display equipped devices are listed (by name) and a checkbox denoting
membership to this group. Check the box to add the devices to the group.
External pager
If connection is to be made to an external Pager, enter the Pager identifier into the number
field for, this the identifier sent via the TAP output interface. Check the box to add the
external Pager to the group.
Submit
Submit the new Pager group membership.
Note: - if more than 35 devices are selected, the changes will not be executed and the
Pager group will revert to it's saved settings.
Alert rules
Alert rules manage the target Pager groups for alarms raised and enables all those alarms
raised in different zones and by devices assigned to specified user groups, to be directed
to particular Pager groups. Alarms with raised and normal escalations and at different
times of day, can be similarly routed. The page operates in a number of modes, displaying
the current rules table, allowing new rules to be added and existing rules to be modified
and deleted.
9261-8173 Issue 2
Page 43
© 2007 Multitone Electronics PLC