Installation Instructions
Table Of Contents
- Approvals
- System Overview
- Network Design and Survey
- Installation
- Pre-requisites
- Installing the Hub
- Repeaters
- PPP Modem
- The Browser Interface
- Accessing the HUB with the browser interface
- Connect the Hub to the PC using Windows XP
- Using the Web Browser to Access the EkoTek Hub
- Main menus
- Maintenance Menus
- Configuration menus
- Final Checks
- Appendices
- Related Documentation and Revision History
EkoTek System Installation and Configuration Manual Browser Interface
Zone
Each Repeater is allocated a zone. Repeaters set with the same zone will all connect
to that Hub. This ensures that when a repeater is within the mesh of more than one
Hub, it is forced onto the required Hub. Up to 16 zones are supported by the EkoTek
system.
Submit
Click Submit to enter changes.
Pager and Fob
Name
The name of the Pager/Fob may be changed, by entering a new name in the box.
Device mode
Each Pager and Fob is allocated a device mode (1-32). The device mode defines the
alarms and responses to them. See Device Mode (page 38).
User group
Select from drop list to set User group (1-16).
Submit
Click Submit to enter changes.
Device Mode
This section allows changes to be made to device parameters. The initial page presents a
list of the different hardware types. A drop down menu allows selection of a specific
device mode (1-32) for the hardware type and a details button, which re-directs the
browser to the specific hardware device mode (HUB, FOB, PAGER, REPEATER).
9261-8173 Issue 2
Page 38
© 2007 Multitone Electronics PLC