Installation Instructions
Table Of Contents
- Approvals
- System Overview
- Network Design and Survey
- Installation
- Pre-requisites
- Installing the Hub
- Repeaters
- PPP Modem
- The Browser Interface
- Accessing the HUB with the browser interface
- Connect the Hub to the PC using Windows XP
- Using the Web Browser to Access the EkoTek Hub
- Main menus
- Maintenance Menus
- Configuration menus
- Final Checks
- Appendices
- Related Documentation and Revision History
EkoTek System Installation and Configuration Manual Browser Interface
same serial number as the new requested device, the existing device details will be
displayed.
Details
Hub
Name
The name of the Hub may be changed, by entering a new name in the box.
Device mode
Each Pager and Fob is allocated a device mode (1-32). The device mode defines the
alarms and responses to them. See Device Mode (page 38).
User group
Select from the drop list, to set User group 1-16.
Zone
Fixed devices are allocated a Zone number, allowing assist messages from mobile
devices to be sent to different Pager groups, based on the Repeater (Zone) that the
mobile device is connected to. Up to 16 zones are supported by the EkoTek system.
Submit
Click Submit to enter changes.
Repeater
The name of the Repeater may be changed, by entering a new name in the box.
Device mode
Each Repeater is allocated a device mode (1-32). The device mode defines the
alarms and responses to them. See Device Mode (page 38).
9261-8173 Issue 2
Page 37
© 2007 Multitone Electronics PLC