Installation Instructions

EkoTek System Installation and Configuration Manual Browser Interface
Devices
The overview page lists all the devices connected in the EkoTek network.
Refresh:
To get the current list of devices, select the hardware type to be listed from the drop list
and click the ‘Refresh’ button.
The devices will then be listed; the first column gives the hardware type-serial number of
the device, the second column gives the device name and the third provides a "Details"
button, to go to that specific device’s record.
The serial number of each device is displayed and the device name.
001-xxxxxxx indicates a hub
010-xxxxxxx indicates a fob
020-xxxxxxx indicates a pager
030-xxxxxxx indicates a repeater
Click the ‘Details’ button to see the details of any device.
Add
Click ‘add’ to go to the `add a new device´ entry pages.
1. Select device type from menu.
2. Enter serial box and enter the serial number and name. The entry screen below is for
a Repeater. Similar screens are shown for Hub, Fob and Pager, with the appropriate
hardware code displayed.
3. Submit: Click to add the new device. If valid, then the individual device entry page is
displayed. If not possible (invalid serial number length, attempt to add a device prior
to the Hub, attempt to add a second Hub, too many devices already on-system etc.)
then ‘Invalid device request’ is displayed. If a device exists in the database with the
9261-8173 Issue 2
Page 36
© 2007 Multitone Electronics PLC