Installation Instructions
Table Of Contents
- Approvals
- System Overview
- Network Design and Survey
- Installation
- Pre-requisites
- Installing the Hub
- Repeaters
- PPP Modem
- The Browser Interface
- Accessing the HUB with the browser interface
- Connect the Hub to the PC using Windows XP
- Using the Web Browser to Access the EkoTek Hub
- Main menus
- Maintenance Menus
- Configuration menus
- Final Checks
- Appendices
- Related Documentation and Revision History
EkoTek System Installation and Configuration Manual Installation
• Configure the port to set the interface speed to 57600.
5. Click OK - a blank terminal window will open. You should now be communicating
directly between the COMPORT and modem. To confirm this, type in the two letters
'AT' and press 'enter'
• Type in 'AT' (Enter)
If you are communicating, the modem will reply with 'OK'. If so, proceed to Step 6.
9261-8173 Issue 2
Page 21
© 2007 Multitone Electronics PLC