Installation Instructions
Table Of Contents
- Approvals
- System Overview
- Network Design and Survey
- Installation
- Pre-requisites
- Installing the Hub
- Repeaters
- PPP Modem
- The Browser Interface
- Accessing the HUB with the browser interface
- Connect the Hub to the PC using Windows XP
- Using the Web Browser to Access the EkoTek Hub
- Main menus
- Maintenance Menus
- Configuration menus
- Final Checks
- Appendices
- Related Documentation and Revision History
EkoTek System Installation and Configuration Manual Installation
Click the Configuration Manager and go to the Call Control tab
Set the Number of rings to answer call box to 1.
Click the Save to Modem button, which stores the current values from the Configuration
Manager's fields to the writable memory of the modem.
Using Windows Hyper Terminal to Set Interface Speed
A terminal program is an application that will enable a PC to communicate directly with a
modem. If you are using Windows 2000 or Windows XP, you can use the Windows
HyperTerminal program as it is included as part of the operating system.
1. Check that the modem is connected to a serial port on the PC.
9261-8173 Issue 2
Page 18
© 2007 Multitone Electronics PLC