User's Guide

EkoTek Pager
Part No. 9261-8275 Issue 2.0 9
Status and Warning Messages
When your EkoTek Pager is switched on the Standby Screen is
displayed. This consists of the time and date plus additional status
and warning messages. A typical screen is shown below:
The first line is the clock displaying the current time and date, the
time may be in either a 12 or 24-hour format. In the top right hand
corner the pager will display Day or Night this is used to indicate
the shift mode.
The second line displays The Pager Name or ‘n’ Unread Message,
showing how many messages have been received but not viewed.
The third line shows the status of the alert, Silent to warn that the
audible alert has been turned off, or No Vibrate to show that the
vibrate alert has been turned off. When both audible and vibrate
alerts are turned off, Silent and No Vibrate alternate at 2-second
intervals. If nothing is displayed, then both audible and vibrate alert
are turned on.
The fourth line normally displays the EkoTek logo or location
information, however, once the battery reaches a state where it
requires replacement, Replace Battery will be displayed.
If the EkoTek Pager is out of range from the wireless network the
Out of Range message will also be displayed. In situations where
the ‘battery requires replacement’ and the pager is ‘out of range’
only the highest priority will be displayed.
11:34 AM 12.03.07 Day
Paul Smith
Silent
EkoTeK