User's Guide

EkoTek Pager
Part No. 9261-8275 Issue 2.0 8
Switching On Your EkoTek Pager
To switch on, press and hold the X button for more that half a
second. A message will then be displayed for three seconds, whilst
self-checks are being performed. Finally, the Standby Screen will
be displayed:
An exclamation mark (!) will flash between the Hours and the
Minutes (11!34 AM). This indicates that the EkoTek Pager is in the
process of detecting the EkoTek wireless network. Once the
network is detected this will change to a flashing ‘colon’ or ‘period’
symbol.
If your EkoTek Pager does not switch on, check that a fresh battery
is correctly installed, see section: Changing the Battery.
The 4
th
line of the screen will display either ‘EkoTek’ or a location
name once the pager has received its configuration from the
network.
11!34 AM 12.03.07