User's Guide

EkoTek Pager
Part No. 9261-8275 Issue 2.0 33
Changing the Battery
When the battery is near the end of its operating life, the EkoTek
Pager is programmed to provide a visual, audio and vibrate alert
warning. The normal audible beep alert will change to a different
tone and the Replace Battery warning will be displayed on the
Standby Screen:
The EkoTek Pager will continue to operate normally for several
days. To ensure that calls are not missed, the old battery should be
replaced with a fresh AAA sized cell as soon as possible.
To remove the battery door, press and hold the battery door lock
"pip" on the back of your EkoTek Pager. At the same time slide the
battery door off in the direction of the arrow.
Insert the new battery in the direction as shown on the case back,
by sliding in the negative (-) end first. Slide the battery door back
into position so that it locks automatically with a click.
Dispose of the old battery carefully with consideration for the
environment and do not recharge or incinerate alkaline batteries.
4:55 PM 12.09.06
Paul Smith
Replace Battery
EkoTek
DOOR
LOCK