User's Guide

EkoTek Pager
Part No. 9261-8275 Issue 2.0 30
Setting the Message Display Options
Your EkoTek Pager is equipped with display options and these may
be set according to your personal requirements. To change the
message display options, press the X button from the Standby
Screen. The Options Screen will now be displayed and select
Options by pressing the X button:
Move the pointers to Display by pressing the T button and select
this item by pressing the X button:
The following screen will be displayed:
The selected item will flash. To select the next item, press the X
button. Each press of the X button will advance the selection to the
next menu item. When the item you wish to change is flashing,
press the S or T buttons to change its value.
**> Options <**
Set 12/24 Hour Mode
Enable Powersave
Power Off
**> Display <**
Auto-delete
Alert
Font 2
Backlight On
Display Timeout 16s
Contrast 16