User's Guide

EkoTek Pager
Part No. 9261-8275 Issue 2.0 12
Dead Man & Man Down Alert
Your EkoTek Pager is equipped with a Dead Man Alert and a Man
Down Alarm facility. These features have to be enabled by the
System Supervisor.
Dead Man Alert
The Dead Man Alert operates by initiating an alert to the EkoTek
Pager at pre-set time intervals, this alert must be acknowledged by
single press on ANY of the pager buttons within a pre-set time
period. Please note that the System Supervisor configures both the
frequency of the Dead Man Alert and the required response time.
If the alert is not acknowledged within the pre-set time period the
EkoTek Pager will automatically initiate the following alarm
escalation sequence:
Please note that at any stage during the Dead Man Alert process it
is possible to cancel the alarm by pressing the X button.
11:34 AM 12.03.07 Day
Paul Smith
Press any key to cancel
11:34 AM 12.03.07 Day
Paul Smith
Raising Alarm
11:34 AM 12.03.07 Day
Paul Smith
Alarm Delivered