Specifications

ACTION : Click >> Button.
COMMENTS :
Hz (This appears in Node
No. Box)
ACTION : Click Send
Button.
COMMENTS :
All information in the Node
No. box is sent to the M560
38
ACTION : Click Read
Button.
COMMENTS :
All information in the Node
No. box is read and stored
by the M560. This also adds
any of the parameters
not selected into Node No.
Box, these will appear below
the selected parameters.
Repeat the sequence of highlighting the parameter
required and clicking on >> until all parameters required
are in the sequence required in the Node No. 1 box. Then
complete the following operations to send and read these
parameters.
M560AT~1.PM5 01/08/101, 12:5238