Specifications

ACTION : Click On Zero
Offset Box CH3.
COMMENTS :
Nominal Box is set at 100%
= 20mA . Zero offset box is
set at 0 = 0mA.
ACTION : Enter Value 5
Into Nominal Box CH3.
COMMENTS :
Nominal box is set at 5% =
1mA. Output 1 is now set at
to 0-1mA.
3.7 Setting, Reading and Sending all parameters and
Analogue Output Information.
ACTION : Click Enable
Button.
COMMENTS :
This action sends a pass
code to allow data to be sent
to PowerSig.
ACTION : Click Send
Button.
COMMENTS :
Updates node output settings.
33
M560AT~1.PM5 01/08/101, 12:5233