User`s guide

ADSL/VoIP Gateway User’s Guide
75
3. This page allows you to enable or disable password
protection. Protection is already enabled by default. Click
Next>. The following page is displayed:
Figure 89: Password: Setup page
4. This page displays the current username and password
settings. Type your own unique username and password in
the relevant boxes. They can be any combination of letters
or numbers with a maximum of 20 characters. The default
setting uses admin for both the username and password.
We recommend that you do not set the same character
combination for both username and password.
5. Click Next>. The following page is displayed:
Figure 90: Password: Confirm page
6. This page confirms that password protection is enabled and
displays the username that will be required in order to
access the web pages. If you are happy with these settings,
click Confirm Changes. The Enter Network Password login
box is displayed. You need to login to the web pages using
your new username and password. For details of how to do
this, see Accessing the Web pages on page 19.
Disabling password protection
If you do not want to use password protection, follow the
instructions in Setting your username and password on page 74
and at step 3, select Disable and then click Next>.