User`s guide

ADSL/VoIP Gateway User’s Guide
73
Figure 85: Internet Access: VPI and VCI Setup page
5. At this page, click on the VCI and VPI setting determined by
your ISP:
• Fixed (default) - click on this if your ISP tells you to use
default VPI and VCI settings. This is the most common
setup.
• Manual – click on this if your ISP has provided you with
specific VPI and VCI settings. Click Next>. At the next
page, type the provided VPI and VCI settings in the
relevant boxes.
6. Click Next>. The following page is displayed:
Figure 86: Internet Access: Confirm page
This page confirms the address settings that you have
manually configured (the values displayed above are for
example purposes only). If you selected the Manual option
at step 5, the VPI and VCI values that you entered are also
displayed on this page.
7. If you are happy with your settings, click Confirm Changes.
The Internet Access page is displayed and your
configuration is complete.