User`s guide

ADSL/VoIP Gateway User’s Guide
70
Configuring your DHCP DSL connection
If your ISP uses a DHCP DSL connection, your ISP may tell you
to set unique path and circuit numbers (called VPI and VCI) in
order to connect your device to the ISP’s Internet service. In
most cases, your device will use default settings, so you may
not need to enter these values.
Note
Your ISP will provide you with the VPI/VCI values necessary to
setup a DHCP DSL connection.
1. From the left-hand Setup menu, click on Internet Access.
The following page is displayed:
Figure 78: Internet Access page
This page displays information about your current Internet
access configuration.
2. Click on Change the Internet Access setting here… The
following page is displayed:
Figure 79: Internet Access: Types of Access page
3. Select DHCP then click Next>. The following page is
displayed: