User`s guide

ADSL/VoIP Gateway User’s Guide
67
Figure 71: Internet Access: PPPoA page
4. Enter the PPP username and password provided by your
ISP. Type them in the relevant boxes, and then click Next>.
The following page is displayed:
Figure 72: Internet Access: VPI and VCI Setup page
5. Click on the VCI and VPI setting determined by your ISP:
• Fixed (default) - click on this if your ISP tells you to use
default VPI and VCI setting. This is the most common
setup.
• Manual – click on this if your ISP has provided you with
specific VPI and VCI settings. Click Next>. At the next
page, type the provided VPI and VCI settings in the
relevant boxes.
6. Click Next>. The following page is displayed:
Figure 73: Internet Access: Confirm page
This page confirms your PPP settings. If you selected the
Manual option at step 5, the VPI and VCI values that you
entered are also displayed on this page.
7. If you are happy with your settings, click Confirm Changes.
The Internet Access page is displayed.