User`s guide

ADSL/VoIP Gateway User’s Guide
66
Your ISP may also tell you to set unique path and circuit
numbers (called VPI and VCI) in order to connect your device to
the ISP’s Internet service. In most cases, your device will use
default settings, so you may not need to enter these values.
Note
Your ISP will provide you with the login details and VPI/VCI
values necessary to set up a PPP login account.
If your ISP wants you to connect to the Internet using PPP,
follow the instructions below.
1. From the left-hand Setup menu, click on Internet Access.
The following page is displayed:
Figure 69: Internet Access page
This page displays information about your current Internet
access configuration.
2. Click on Change the Internet Access setting here… The
following page is displayed:
Figure 70: Internet Access: Types of Access page
3. Select either PPPoA or PPPoE, depending on which PPP
type your ISP wants you to use. In this example, PPPoA is
selected, but the instructions for PPPoE are identical. Click
Next>. The following page is displayed: