User`s guide

ADSL/VoIP Gateway User’s Guide

• Change the channel currently in use; click Change your

wireless channel here… and follow the instructions in

Select a Channel on page 45.

• Change the network name (SSID); click Change your

wireless network name here… and follow the instructions in

Set the Wireless Network Name on page 44.

• Configure wireless security; click Change Wireless Security

settings here… and follow the instruction in Configure

Wireless Network Security on page 46.

• Configure address authentication; click Change which

wireless PCs are allowed to connect here… and follow the

instructions in Configure Wireless Address Authentication

on page 48.

• Display information about the wireless PCs connected to

the device; see Displaying details of Wireless PCs on page

53.

Enabling/disabling wireless networking

Note

Once you have completed the First Time Settings wizard,

wireless networking is enabled on the device by default.

At the Wireless Network page, click on Enable or disable the

wireless network here… The following page is displayed:

Figure 48: Wireless Network: Enable/Disable page

Choose whether to enable or disable wireless networking:

• To enable the network, click on the Enable radio button and

then click Next>. This takes you through a subset of the

First Time Setting wizard, starting with the page that allows

you to configure the current Wireless Network Name.

Follow the instructions starting from Set the Wireless

Network Name on page 44.

• To disable the network, click on the Disable radio button

and then click Next>. The next page confirms the disabled

state of the wireless network. If you are happy with this

configuration, click on Confirm Changes. The Wireless

Network page is displayed.

Displaying details of Wireless PCs

At the Wireless Network page, click on View details of

connected wireless PCs… The following page is displayed: