User`s guide

ADSL/VoIP Gateway User’s Guide

Figure 44: Wireless Network: Address Authentication (whitelist)

page

3. Click in each box and type each character pair of the MAC

address for the PC you want to whitelist. Click Next>. The

following page is displayed, containing details of the MAC

address that you have just added:

Figure 45: Wireless Network: Address Authentication (whitelist

configuration) page

4. This page allows you to configure the addresses on the

whitelist:

• If you want to add another MAC address to the

whitelist, click Add an address here… and repeat the

instructions described in step 3.

• If you want to remove a MAC address from the

whitelist, click Remove an address here… At the

displayed page, select the MAC address that you want

to remove from the drop-down list.

5. Click Next>.

If you are following the First Time Settings wizard, the final page

in the wizard sequence is displayed, which allows you to

Confirm Wireless network changes.

If you have accessed this page from the General Settings

section of the Wireless Network page, click on the Confirm

Changes button to apply changes and return to the Wireless

Network page.

Confirm Wireless network changes

Once you have configured Wireless Address Authentication and

clicked on Next>, the following page is displayed: