User`s guide

ADSL/VoIP Gateway User’s Guide

3. Click in each box and type each character pair of the MAC

address for the PC you want to blacklist. Click Next>. The

following page is displayed, containing details of the MAC

address that you have just added:

Figure 42: Wireless Network: Address Authentication (blacklist)

page

4. This page allows you to configure the addresses on the

blacklist:

• If you want to add another MAC address to the

blacklist, click Add an address here… and repeat the

instructions described in step 3.

• If you want to remove a MAC address from the

blacklist, click Remove an address here… At the

displayed page, select the MAC address that you want

to remove from the drop-down list.

5. Click Next>.

If you are following the First Time Settings wizard, the final page

in the wizard sequence is displayed, which allows you to

Confirm Wireless network changes.

If you have accessed this page from the General Settings

section of the Wireless Network page, click on the Confirm

Changes button to apply changes and return to the Wireless

Network page.

Configuring the wireless PC whitelist

1. Once you have selected Only allow the wireless PCs I

specify to connect radio button and then clicked Next>, the

following page is displayed:

Figure 43: Wireless Network: Address Authentication (whitelist)

page

2. To add a network PC to the whitelist, click Add an address

here… The following page is displayed: