User`s guide

ADSL/VoIP Gateway User’s Guide
49
with each character either a number between 0 and 9, or a letter
between A and F. For example, 00:20:2b:80:2f:30.
To configure which wireless PCs can access your device,
choose one of the following options:
• If you want any wireless PCs to have access to your device,
click on the Allow any wireless PCs to connect radio button.
Click Next>.
If you are following the First Time Settings wizard, the final
page in the wizard sequence is displayed, which allows you
to Confirm Wireless network changes.
If you have accessed this page from the General Settings
section of the Wireless Network page, click on the Confirm
changes button to apply changes and return to the Wireless
Network page.
• If you want to create a blacklist of PCs that cannot access
your device, click on the Allow all wireless PCs to connect
except those I specify radio button and then click Next>.
Now follow the instructions in Configuring the wireless PC
blacklist on page 49.
• If you want to create a whitelist of PCs that can access your
device, click on the Only allow the wireless PCs I specify to
connect radio button and then click Next>. Now follow the
instructions in Configuring the wireless PC whitelist on page
50.
Configuring the wireless PC blacklist
1. Once you have selected Allow all wireless PCs to connect
except those I specify radio button and then clicked Next>,
the following page is displayed:
Figure 40: Wireless Network: Address Authentication (blacklist)
page
2. To add a network PC to the blacklist, click Add an address
here… The following page is displayed:
Figure 41: Wireless Network: Address Authentication (blacklist)
page