User`s guide

ADSL/VoIP Gateway User’s Guide

Wireless Network First Time Settings Wizard

This section describes how to follow the wireless network

wizard in order to configure your wireless network settings for

the first time. The wizard sequence allows you to configure each

of the following Wireless settings in order:

• The country that your network is operating in

• The specification standard used by the wireless network

• The wireless network name

• The wireless network channel

• Wireless network security

• Wireless network address authentication

Note

Each page of the wizard contains a Cancel button. Click on this if

you want to exit the wizard at any time.

Setting the Country

1. From the First Time Settings section of the Wireless

Network page, click Change your wireless first time settings

here… The first page of the wizard is displayed:

Figure 31: Wireless Network: Set Country page

The number of valid wireless network frequencies varies

from country to country and you need to identify which

country you are operating the device in to ensure that your

network will transmit on the correct frequency.

2. From the Country drop-down list, select the appropriate

country. Click on the Confirm Changes> button to apply

configuration changes and move on to the next page in the

wizard sequence, which allows you to Select your Wireless

Network Type.

Select your Wireless Network Type

The following page allows you to select the Institute of Electrical

and Electronics Engineers (IEEE) specification supported by

your network: