User`s guide

ADSL/VoIP Gateway User’s Guide
29
Once installation is complete, the following page is
displayed:
Figure 13: Update Installed page
3. You must restart your device in order to make the device
aware that a new firmware version has been installed. To
do this, click Restart Productname. The following page is
displayed:
Figure 14: Restarting page
The page tells you that your device is currently being
restarted. Once complete, the Current Status page is
displayed. See the Current Status on page 24.
Manually updating firmware
You can manually download the latest firmware version from ’s
website to your PC’s file directory. Click on the Multitek link.
www.multitekarge.com
Once you have downloaded the latest firmware version to your
PC, you can manually select and install it as follows:
1. Click on the Browse… button.
Figure 15: Manual Update Installation section
(Note that if you are using certain browsers (such as Opera
7) the Browse button is labeled Choose.)
Use the Choose file box to navigate to the relevant directory
where the firmware version is saved.