User`s guide

ADSL/VoIP Gateway User’s Guide
21
use:
• Welcome; see Accessing the Web pages on page 19
• Current Status; see Current Status on page 24
• Firmware Update; see Check for Updates on page 26
• Health Check; see Health Check on page 31
• Help; see Help on page 38
The Setup list contains
entries that allow you to
change the default settings
on your device using a
series of Web pages. If you
are a typical user, you will
not need to make significant
changes to the default
configuration.
• Addressing; see Addressing on page 40
• Wireless Network; see Wireless Network on page 42
• Advanced Security; see Security on page 55
• Internet Access; see Internet Access on page 63
• Password; see Password on page 74
• Reset to Defaults; see Reset to Defaults on page 76
Commonly used buttons
The following buttons are used throughout the web pages:
Button Function
You may need to configure the default
settings on more than one Web page.
Click on this button once you have
changed the configuration on your
current page and are ready to move
on to the next.
This button appears on every
configuration page. Click on this
button if at any time you decide that
you do not want to change the existing
settings.
This button appears on the final page
of a series of configuration pages.
Click on this button to confirm that you
are happy with the changes that you
have made and want to save them.
Radio buttons – these appear on
many configuration pages. You will be
asked to select one radio button from
the selection of two or more available.
You cannot select more than one
radio button at a time.
The following terms are used throughout this guide in
association with these buttons:
• Click – point the mouse arrow over the button, menu entry
or link on the screen and click the left mouse button. This
performs an action, such as displaying a new page.