Specifications

2.0 PROGRAMMING
2.1 Using the M550 Software Monitor 95.
(M550 Software Monitor 95 can be obtained from your
Multitek distributor, or the Multitek website
www.Multitek-Ltd.com)
2.2 Open the Monitor95.exe file and the following screen
will be displayed.
6
The following functions displayed relate to the PC or
master node and are set by default to the following
settings, Response time = 300mS, Node = 1, Baud Rate =
9600, Parity = None. It may not be necessary to alter the
above settings but the communication port has to be
opened by clicking on start and following section 2.5.
M550MAN.PM5 01/08/101, 12:486