User guide

Chapter 5: Technical Configuration
Config Info CheckList
Type of Config Info Gathered TalkAnytime
Configuration screen
on which to enter
Config Info
√
IP info for TalkAnytime unit
● IP address
● Gateway
● DNS IP (if used)
● 802.1p Prioritization (if used)
Ethernet/IP Parameters
Interface Type
(Choices: E&M, FXS/FXO*)
Interface Parameters
*In FXO/FXS systems,
channels used for phone, fax,
or key system are FXS;
channels used for analog PBX
extensions or analog telco
lines are FXO.
E&M info (only if E&M is used)
● Type (1-5) ● 2 or 4 wires?
● Dial Tone or Wink?
Interface Parameters
Country Code Regional Parameters
Email address for voip
(optional)
SMTP Parameters
Reminder: Be sure to Save Setup after entering configuration values.
Multi-Tech Systems, Inc. TalkAnyTime User Guide 62