User guide

Chapter 5: Technical Configuration
Multi-Tech Systems, Inc. TalkAnyTime User Guide 61
Telephony Interface Parameters
The following parameters must be known about the PBX or telco central office equipment to which the
analog TalkAnytime will connect:
9
Phone Parameters
Ask phone company or
telecom manager.
Telephony Interface Parameters:
Record for this VOIP Site
#
• Which interface type is to be used?
E&M_____ FXS/FXO_____
• If FXS, determine whether the line will be used for a
phone, fax, or KTS (key telephone system)
• If FXO, determine if line will be an analog PBX
extension or an analog line from a telco central office
• If E&M, determine these aspects of the E&M trunk
line from the PBX:
• What is its Type (1, 2, 3, 4, or 5)?
• Is it 2-wire or 4-wire?
• Is it Dial Tone or Wink?
SMTP Parameters (for email call log reporting)
required if log reports of
TalkAnytime call traffic
are to be sent by email
Optional
SMTP Parameters
Preparation Task:
Ask Mail Server
administrator to set up
email account (with
password) for the
TalkAnytime unit itself.
Be sure to give a unique
identifier to each
individual TalkAnytime
unit. .
Get the IP address of the
mail server computer, as
well.
To: I.T. Department
re: email account for VOIP
[e-mail]