User guide

TalkAnytime Quick Start Instructions Gathering Phone/IP Details
Phone/IP Details Often Needed/Wanted
Obtain Email Address for TalkAnytime (for email call log reporting)
required if log reports of
TalkAnytime call traffic
are to be sent by email
Optional
SMTP Parameters
Preparation Task:
Ask Mail Server
administrator to set up
email account (with
password) for the
TalkAnytime unit itself.
Be sure to give a unique
identifier to each
individual TalkAnytime
unit.
Get the IP address of the
mail server computer, as
well.
To: I.T. Department
re: email account for VOIP
[e-mail]
Config Info CheckList
Type of Config Info Gathered TalkAnytime
Configuration screen
on which to enter
Config Info
√
IP info for TalkAnytime unit
● IP address
● Gateway
● DNS IP (if used)
● 802.1p Prioritization (if used)
Ethernet/IP Parameters
Interface Type
(Choices: E&M, FXS/FXO*)
Interface Parameters
*In FXO/FXS systems,
channels used for phone, fax,
or key system are FXS;
channels used for analog PBX
extensions or analog telco
lines are FXO.
E&M info (only if E&M is used)
● Type (1-5) ● 2 or 4 wires?
● Dial Tone or Wink?
Interface Parameters
Country Code Regional Parameters
Email address for TalkAnytime unit
(optional)
SMTP Parameters
Reminder: Be sure to Save Setup after entering configuration values.
Multi-Tech Systems, Inc. TalkAnyTime User Guide 18