User guide

Chapter 5: Technical Configuration
“Logs” Screen Definitions
Field Name Values Description
Y/N Allows TalkAnytime debugging messages to be read via a basic terminal
program like HyperTerminal ™ or equivalent. Normally, this should be
disabled because it uses TalkAnytime processing resources. Console messages
are meant for tech support personnel.
Enable
Console
Messages
Filters (button) Click to access secondary screen on where console messages can be
included/excluded by category and on a per-channel basis. (See the Console
Messages Filter Settings screen on subsequent page.)
Turn Off Logs Y/N Check to disable log-reporting function.
Logs Buttons Only one of two log reporting methods, GUI or SMTP, may be chosen.
GUI Y/N User must view logs at the TalkAnytime configuration program.
SMTP Y/N Log messages will be sent to user-specified email address.
Y/N
This box must be checked if logging is to be done in conjunction with a SysLog
Server program. For more on SysLog Server, see Operation & Maintenance
chapter.
SysLog Server
Enable
n.n.n.n
for n=
0-255
IP address of computer, connected to TalkAnytime network, on which SysLog
Server program is running.
IP Address
Port 514 Logical port for SysLog Server. 514 is commonly used.
integer Set the interval (in seconds) at which logging information will be updated.
Online Statistics
Updation
Interval
Multi-Tech Systems, Inc. TalkAnyTime User Guide 102